Soil blocks are cubes of seed-starting mix pressed into shape with a tool called a blocker. They replace plastic cells entirely. The mix holds its own shape, so there is no container to fill, and the seedling grows in a block that can be moved as one piece. This guide covers the mix, how to make and sow blocks, and the trade-offs.
Short answer
Use a peat- or coir-based seed mix with compost, perlite and a little lime. Moisten it until it looks like brownie batter and holds its shape when squeezed. Press it into blocks, make a small dent in the top, and sow one or two seeds. Keep the blocks moist from below and pot them up when roots appear at the edges.
What a soil block is and why growers use them
A soil block is a compressed cube of moist mix. Once the block is made, it stands on its own. This has three main advantages:
- No plastic containers. You buy the blocker and the tray, and after that the mix is the only recurring cost.
- Air pruning. When a root reaches the outside of the block, it stops growing because there is nothing to push against. Roots that are air pruned branch out, instead of circling the bottom of a cell. This helps prevent root-bound seedlings.
- Less transplant disturbance. The block moves to the next size up or into the garden with the roots intact.
Soil blocks also have trade-offs. They take time to make, especially for a large number of seeds. The sides dry out faster than the middle, so they need careful watering. And a block is only as good as the mix, so the mix has to be right.
Choosing a mix that holds together
A soil block mix must do two jobs. It must hold its shape when pressed, and it must still let air and water move through it. Most blends for soil blocks are built on:
- Peat or coir for moisture and structure
- Compost for a little organic matter
- Perlite for drainage and air space
- A small amount of lime to balance the pH of peat, if the mix does not already include it
Not every commercial seed mix works. In one side-by-side trial, a mix that performed well in pots crumbled when used in a block maker, while a mix formulated for blocks held together well. Check the bag. If it does not say it is suitable for blocks, test it first.
For a general guide to choosing a seed mix, including why garden soil is a poor choice, see that article.
Making the mix
- Start with dry mix in a large tub or bucket.
- Add water gradually and stir with your hands or a trowel. Peat-based mix repels water when it is dry, so this may take several minutes. Keep adding water until the whole batch is evenly damp.
- Use the squeeze test. Grab a handful and squeeze. It should hold its shape and release a few drops at most. If it crumbles, add more water. If it runs through your fingers or leaves a puddle, it is too wet, so add more dry mix.
- Let it rest for a few minutes so the water spreads through the mix. Then check again.
Err slightly on the wet side. A block that is too dry falls apart when it is lifted. A block that is too wet can stick to the blocker and slump before it dries. If the mix is too wet, let it stand uncovered until it firms up.
Pressing the blocks
Blockers come in several sizes. Mini blocks suit small seeds such as lettuce and many herbs. Larger 2-inch blocks suit bigger seeds and fast-growing plants. You can mix sizes in one tray if your blockers allow it. Some growers start small seeds in mini blocks and move them to larger blocks once they have true leaves.
To press a block:
- Fill the blocker with mix and firm it with a light press.
- Push the blocker down into a tray, or onto a flat surface, and press the handle firmly.
- Lift the blocker straight up so the block does not tear.
Place the blocks in a tray that has a solid base. Blocks sit close together and need a tray that supports their weight. Plastic trays with thin walls can flex when you carry a heavy load of wet blocks. A sturdy tray with a wicking mat or a shallow reservoir is the most practical.
Sowing seeds into blocks
Make a small dent in the top of each block with a dibble or your finger. The dent should be about as deep as the seed’s width, or as the packet suggests. Place one seed in the dent for small seeds, or two for larger seeds you plan to thin. Cover with a thin layer of fine mix or vermiculite. Some seeds, such as lettuce, are only pressed onto the surface.
Mist the surface gently. Then cover the tray with a humidity dome or clear plastic wrap until the seeds sprout. Remove the cover as soon as seedlings emerge, to reduce the risk of damping off.
Keeping blocks moist
Blocks dry out quickly, especially at the edges. Water them from below where you can. Place the tray on a wicking mat or stand it in a shallow pan of water for a short time, then drain off any excess. Avoid leaving blocks sitting in standing water for long periods, because that can cause fungal disease.
Check the blocks each day. Lift one to feel its weight, and touch the surface. A block that feels light and dry needs water. A block that feels heavy and is waterlogged does not. For more on bottom watering, see how to water seedlings from the bottom and top.
Potting up blocks
When roots appear at the edges of a block, it is time to move the seedling on. You can either:
- Set the block into a larger block made with the same mix, pressing the new block around the old one.
- Move the block into a pot of seed-starting or potting mix, if you want a bigger root zone.
Handle blocks gently when you move them. Support the block from underneath and keep the seedling upright. Moving a block is much less disturbing than moving a bare root, but it still causes some stress.
Planting out
Blocks need the same hardening off as any other seedling. Harden them off for about a week before planting. When you plant, set the block into a hole so the top is level with the soil surface, then water it in. Tomatoes can be planted deeper, because roots form along a buried stem.
For more on transplanting, see transplanting vegetable seedlings.
Soil blocks vs. cell trays
| Factor | Soil blocks | Cell trays |
|---|---|---|
| Upfront cost | Blocker and sturdy tray | Trays only |
| Time to set up | Slower, especially for many seeds | Faster |
| Root growth | Air pruned at the edges | Can circle the cell bottom |
| Watering | Needs careful, frequent checks | Dries out faster in small cells |
| Transplant disturbance | Low | Low, if the cell is pushed out intact |
Soil blocks suit gardeners who sow a moderate number of seeds and want less plastic. Cell trays suit growers who sow large batches quickly.
Common problems
- Blocks crumble when lifted. The mix is too dry, or it does not contain a binder. Add water, or switch to a mix made for blocks.
- Blocks stick to the blocker or slump. The mix is too wet. Let it firm up before pressing.
- The edges dry out first. Check and water from below more often, and keep a humidity dome on the tray until seedlings emerge.
- Roots run out of the bottom. Pot up sooner, before roots fill the block.
- Seedlings lean or fall over. Check for damping off at the base of the stem, and the light level. See seedlings falling over for the difference.
Frequently asked questions
Is seed starting mix necessary for soil blocks? Yes, or at least a mix that holds together. Garden soil and general potting mix are usually too heavy and do not bind well. A seed mix formulated for blocks is the easiest route.
How big should the blocks be? Use mini blocks for small seeds and 2-inch blocks for larger ones. Match the block to the seed size on the packet.
Can I make my own soil block mix? Yes. A typical home mix is peat or coir with compost, perlite and a little lime. Test the squeeze before pressing a full tray. Commercial mixes are easier to get consistent.
Keep going
- Start seeds indoors with the full process, including containers and light.
- Compare containers if you want to keep using trays.
- Start seeds in rockwool or LECA for a soilless alternative.